Fabric and trims shape how your garments look, feel and last. This guide explains how UK clothing brands source fabric, buttons, zips and labels from China, what to put in a specification and the checks that protect quality.

Quick answer: To source fabric and trims from China, start with a clear specification for each material: fibre composition, weight in GSM, width, colour reference, finish and test needs for fabric, and size, material, finish and colour for buttons, zips and labels. Ask suppliers for swatches, approve lab dips or strike-offs before bulk production, and test colour fastness and shrinkage. Make sure your labels meet the UK Textile Products (Labelling and Fibre Composition) Regulations 2012, check metal trims and dyes against UK REACH limits, and inspect fabric and finished garments before they ship.
Fabric and trims make up a large part of how a garment looks, feels and lasts. They also cause many of the problems UK clothing brands face with Chinese suppliers, from colour that does not match the sample to zips that break after a few weeks. This guide explains how fabric and trims sourcing works in China, what to put in your specification and the checks that protect your brand.
There are two common ways to work with a Chinese clothing factory:
Many brands mix the two. The factory buys standard items such as thread and polybags, while the brand chooses the main fabric and branded trims. If you are still choosing a factory, our guide to sourcing clothing manufacturers in China and Vietnam explains the main factory types.
China has large clusters of textile and trim suppliers. Keqiao in Shaoxing, Zhejiang, is home to one of the biggest fabric trading markets in the world. Guangzhou has major fabric and accessory markets that serve factories across southern China. Yiwu supplies a wide range of small accessories, and the Wenzhou area is well known for buttons and zips. Many mills and trim makers also sell through agents and trading companies, so the supplier you speak to may not be the maker.
| Detail | Example | Why it matters |
|---|---|---|
| Fibre composition | 95% cotton, 5% elastane | Needed for your UK label and affects feel and stretch |
| Construction | Single jersey knit or twill weave | Changes drape, strength and how it sews |
| Weight (GSM) | 180 GSM | Grams per square metre, the main way to compare fabrics |
| Usable width | 150cm | Affects how much fabric each garment uses |
| Colour reference | Pantone code or physical swatch | Gives the dye house a clear target |
| Finish | Brushed, enzyme wash, water repellent | Changes handle and performance |
| Tests | Colour fastness, shrinkage, pilling | Shows how the fabric will behave after washing and wear |
Put the specification in writing and keep a signed swatch on file. When something goes wrong later, the approved swatch is your reference.
A lab dip is a small piece of fabric dyed to match your colour target. The mill usually sends a few options, and you approve the closest one under good daylight or a light box. A strike-off is a sample of a printed fabric, used to check pattern, scale and colours before a full print run.
Approve lab dips and strike-offs before bulk dyeing or printing begins. Bulk fabric is dyed in batches called dye lots, and small shade differences between lots are common. Ask for shade bands or cuttings from each lot, and tell the factory not to mix lots within one garment. Our guide to getting product samples from China explains how samples fit into the wider approval process.
Trims are small, but they are often the first thing to fail. Treat each one as its own product with its own specification.
Put every item into a trims list, sometimes called a bill of materials, with a photo, code, supplier and approved sample for each one. This saves time when you reorder.
A few UK rules affect fabric and trim choices directly:
Care labels and country of origin labels are not always required by law in the UK, but most retailers expect them and any claim you make must be accurate. For a wider view of compliance, see our guide to clothing and apparel sourcing from China.
Fabric mills often set minimum order quantities per colour, and custom dyed or printed fabric usually needs larger runs than stock fabric. Branded trims such as woven labels, custom buttons and engraved zip pullers also have their own minimums. A small brand can often lower its MOQs by using stock fabrics in standard colours, sharing trims across styles and keeping the colour range tight at launch. Our guide to minimum order quantities explains how to negotiate them.
Our team in China finds and vets mills and trim suppliers, manages lab dips and samples, and checks bulk materials before production. Our clothing manufacturing service covers the full process, and our Private Label package supports brands launching their own designs. If you are starting out, read our guide on how to start a clothing brand in the UK.
Want help planning your fabric and trims? Book a free chat with our UK team.
GSM means grams per square metre. It measures how heavy a fabric is. A higher GSM usually means a thicker, heavier fabric, which helps you compare quotes from different mills.
A lab dip is a dyed fabric sample used to match a solid colour. A strike-off is a printed fabric sample used to check a print before bulk production.
Most small brands let the factory buy fabric and trims on a full package basis. Buying it yourself gives more control but means you manage every material order and its quality.
Yes. Textile products sold in the UK must show their fibre composition using the fibre names set out in the Textile Products (Labelling and Fibre Composition) Regulations 2012.
Bulk fabric is dyed in separate lots, and each lot can vary slightly. Approve shade bands from each lot and ask the factory not to mix lots within a garment.
Sometimes. Stock buttons and zips in standard colours often have low minimums. Custom branded trims usually need larger orders, so share them across several styles where you can.